How to Turn a Chair Into a Rolling Chair

Dreaming of an ergonomically designed workspace? It is important to know how to turn a chair into a rolling chair. Adding a rolling chair to your seating area is one simple way to make your workstation more comfortable and user-friendly. But why buy when you can DIY? 

How to Turn a Chair Into a Rolling Chair

With just a few supplies, some basic instructions, and a bit of decision-making, you’ll quickly turn a regular chair into one that rolls! In this blog post, we’ll show you how it’s done – step by step – so that soon enough, you’ll be rolling around happily in your newly converted sitting space.

Tools You Will Need

  • Ruler
  • Drill
  • Screwdriver
  • 5 Casters

6 Steps Guide on How to Turn a Chair Into a Rolling Chair

1. Measure the Legs of Your Chair

Before you start to turn a chair into a rolling chair, the very first thing you must do is measure your chair legs with a ruler. It may sound like an arduous task but it is of utmost importance that you are aware of the exact shape and size of each leg to pick suitable casters that will be able to firmly attach to your chair. 

You should also take into account any additional decorative caps that the chair may have so you can select wheels compatible with those. Once you have determined the measurements, you’ll be ready to move on to the next exciting step!

2. Drill Holes Into Each Leg of the Chair

Before you do this, make sure the holes are going to be properly aligned so that when the casters are installed, they all roll in the same direction.

Installing Casters to Convert

Installing casters to convert an ordinary chair into a rolling chairman be a fun and functional project. Once you’ve chosen the right size casters, it’s time to drill holes into each leg of your chair. Positioning is key here – make sure that when the hole you’re drilling is in line with its surrounding holes. 

So that your casters all point in the same direction and turn your chair into a rolling one. Use caution when using power tools, as proper safety techniques must always be observed. If possible, use a drill press and tighten everything down firmly after installation to ensure successful rolling!

3. Attach Two Screws Per Caster

Turning an ordinary chair into a rolling chair is both functional and aesthetically pleasing. After choosing your casters, begin by drilling holes in the underside of each leg. Ensure that each hole is wide enough for the caster to be inserted, but not so wide that the wheel does not stay secure when assembled. 

Once drilled, use a screwdriver to affix two screws per caster from the inside of each hole. This will further ensure maximum stability and hold up to wear and tear over time. With some simple preparation and assembly, you can customize any ordinary chair with easy-rolling wheels and transform it into a rolling chair in no time!

4. Insert a Caster Into Each Hole

Turning a chair into a rolling chair couldn’t be easier. Once the screws are securely in place all around the chair, simply insert each caster into its respective hole. Firmly press each caster down until you feel it lock into position for stability and maximal mobility. 

You will want to make sure your rolling chair is mobile and does not swivel or wobble when you are in use. With that finished, you’ll be able to conveniently roll from point A to point B with ease – all thanks to your new creation!

5. Begin Testing Out Your New Rolling Chair

After securely screwing in the casters, you have taken the first step of transforming a regular chair into a rolling chair. Testing it out is just as important, to ensure that it can handle your body weight and daily activities. Ensure that all four casters move easily with minimal difficulty. 

Testing It Out

Take your time to adjust the height of the arms and backrest so it suits your level of comfort best. Start by pushing yourself forward slowly with your feet firmly planted on the ground and adjust accordingly. With a few quick tests like this, you can guarantee yourself stress-free seating for many years to come.

6. Make Sure It Performs Optimally

Ensuring regular upkeep of your rolling chair is essential to keep it in tip-top shape and make sure you get an optimal experience while using it. Start by making sure all of the casters are spinning freely, and that the screws are not stripped or loosened. 

Take time to tighten all casters and examine the rings and plates. This will help reduce any premature deterioration, as well as prevent wobbling, squeaking, or other issues. As you regularly maintain your rolling chair, you can enjoy many years of convenience with a good-looking object that has excellent stability and support.

And that’s it! With just a few tools and supplies, you’ll have transformed an ordinary chair into a well-functioning rolling chair – perfect for any workspace. Enjoy the newfound flexibility and comfort of your new rolling office chair!

Tips to Turn a Chair Into a Rolling Chair

  1. Remove the legs from the chair.
  2. Cut four pieces of PVC pipe to the desired length for the legs of the chair.
  3. Attach the PVC pipes to the bottom of the chair using PVC glue or super glue.
  4. Attach caster wheels to the bottom of each PVC pipe.
  5. Reattach the legs to the chair.
  6. Enjoy your new rolling chair!

How to Turn an Ordinary Chair into a Rolling Chair in No Time?

Transforming a regular chair into a rolling one doesn’t have to be a difficult process. It’s easy to accomplish in no time. All you’ll need is just an office chair without arms and caster wheels that fit over the existing chair legs. Start by carefully lifting the chair off the ground, using both hands. 

Align the Replaceable Casters

Next, align the replaceable casters onto the existing chair legs and press down firmly until they are secured in position. Finally, slowly set the chair back on its legs and then test it out to see if it is working smoothly or not. Et voila! You now have an amazing chair with wheels ready to take you through your day!

How to Make Your Own Rolling Chair from Scratch?

Making your rolling chair from scratch can seem daunting at first, but it doesn’t have to be complicated. With the right tools and a bit of knowledge about wheels, brackets, and other components, you can easily create a durable and useful chair. 

Start by selecting the type of wood that best matches your needs and place the base onto the chair frame. Next, attach the wheels securely to the base and make sure all screws are firmly tightened. Finally, add cushioning to your creation for extra comfort and you’ll have your personalized rolling chair in no time!

DIY Project – Converting An Everyday Chair into A Sleek, Mobile Roller

It is possible to give an old, everyday chair a new purpose and a modern look with some DIY modifications. It is possible to convert any chair into a sleek, mobile roller with just a few simple steps. The process involves measuring the right size of casters for your particular chair model, drilling holes into the base of the chair, and adding spacers if needed. 

Then screwing in your casters so that they fit firmly onto the base. Some chairs may need additional hardware – like furniture glides – for extra stability. With the right parts and tools, you can create something unique that brings freshness to any room in minutes!

Frequently Asked Questions

How Often Should You Maintain Your Rolling Chair?

It is recommended to maintain your rolling chair regularly to ensure optimal performance and longevity. Inspect all casters, screws, rings, and plates for any signs of wear or tear, and take time to tighten any loose connections. 

Doing so will prevent wobbling, squeaking, or other issues that could arise from a lack of maintenance. With regular upkeep, you can enjoy many years of convenience with a good-looking object that has excellent stability and support. A rolling chair is a great addition to any workspace and once you have the basics down, it can be a rewarding experience.

How Do You Properly Store a Rolling Chair?

When it comes to storage, the most important thing is to make sure that the chair remains level at all times. If storing long-term, use furniture sliders or glides to keep the wheels from wearing out. If possible, try to avoid storing on uneven surfaces and always remove the cushion and store it separately. 

Protect the Chair’s Finish by Covering It

Finally, make sure to protect the chair’s finish by covering it with a dust cover or cloth whenever possible. Taking these simple steps will ensure that your rolling chair looks great and functions properly when you’re ready to use it again!


Whether you are looking to make an upgrade on your existing office chair or want to start from scratch, turning a chair into a rolling one is a doable task with the right approach. 

You should carefully determine how to turn a chair into a rolling chair. If you’re feeling adventurous, you can even create something unique with DIY modifications. 

Make sure to maintain and store your rolling chairs properly for optimal performance and longevity. With the right tools and knowledge, you can easily enjoy many years of convenience with a good-looking object that has excellent stability and support. Happy rolling!

Photo of author

Angela Ervin

Angela is the executive editor of officefixes. She began her career as an interior designer before applying her strategic and creative passion to home and office design. She has close to 15 years of experience in creative writing and online content strategy for Office design and decor,home decorations as well as other efforts. She loves her job and has the privilege of working with an extraordinary team. She lives with her husband, two sons, and daughter in Petersburg. When she's not busy working she spent time with her family.

Leave a Comment