If you’re in the market for a new recliner, you’ll want to ensure that you get the perfect fit.
To do that, measuring the springs on your existing recliner is important. In this blog post, we’ll walk you through how to measure recliner springs so that you can find a replacement that fits just right.
Can You Measure Recliner Springs?
Measuring the springs in a recliner is a tricky and often overwhelming task, especially for those unfamiliar with furniture repair. To ensure accurate measurements, one must first remove the upholstery and access the springs.
Finally, they must measure the diameter of each spring using a ruler or tape measure to determine if replacement parts are needed. Depending on the make and model of your recliner, there may be other considerations to keep in mind when measuring their springs.
Knowing how to measure recliner springs properly can help one avoid costly mistakes and get their recliner comfortably seated again sooner rather than later.
Why Should You Measure Recliner Springs?
Measuring recliner springs is essential for ensuring a comfortable and reliable seat when you purchase a new piece of furniture. It’s the only way to guarantee the correct tension level, and an accurate gauge will help you determine if your floor can safely support the recliner.
Poorly constructed recliners often have these springs installed incorrectly, using hardware that’s too weak or too stiff for proper support, giving you a terrible sitting experience.
With the right measurements indicating optimal tension levels, you can feel confident that your recliner will be strong enough to handle use over time while being comfortable while in use.
Investing in the right tools to take measurements is well worth it as it provides peace of mind when selecting new furniture and keeps your guests happy as well.
7 Steps to Follow on How to Measure Recliner Springs
Step 1: Measure the Width of The Spring
Start by measuring the width of the spring by taking a ruler or measuring tape and placing it at one end of the spring. Then measure from side to side and record your measurements. You should also note any curves in the spring, as this will help narrow your search for an exact replacement.
Step 2: Measure the Length of The Spring
The length of your spring is also important when looking for a suitable replacement. To get an accurate measurement, use a flexible measuring tape and place one end at one end of the spring and extend it as far as it will go until you reach the other end of the spring.
Record your measurement. Again, take note if there are any curves in your existing spring so that you can find an exact match with ease.
Step 3: Measure How Many Coils Are in The Existing Spring
The next step is to measure how many coils are in the existing spring. To do this, count each coil from top to bottom without missing any coils—even if they are overlapping or connected together—and make sure they are all included in your count.
Once done, record this number as well since coil counts vary between models of recliners and will help you find an exact match for a perfect fit!
Step 4: Measure the Thickness of The Coil
The thickness of the coils is also a key measurement in finding the right replacement spring. To do this, use a ruler or measuring tape and measure how thick each individual coil is in millimeters. Then record this measurement to ensure you’re getting an exact match.
Step 5: Measure the Total Length of The Spring
Once you’ve measured how many coils are in the existing spring, use a flexible measuring tape and measure how long each coil is from top to bottom. Then add these measurements together to get an accurate total length measurement for your spring. Record this number as well.
Step 6: Measure the Wire Gauge of The Spring
The wire gauge of a spring is another important measurement to take note of when shopping for a replacement. Depending on the wire’s thickness, you’ll need to use calipers or a micrometer. Then measure how thick the wire is, record your measurement, and look for a replacement spring with the same wire gauge.
Step 7: Measure The Coil Pitch of The Spring
The coil pitch is how many coils are in one inch of the spring and is important when looking for a proper fit. To measure this, use a ruler or measuring tape and count how many individual coils are in one inch. Then record your measurement and use it to find a suitable replacement spring.
That’s it! You’ve now learned how to measure recliner springs so that you can find the perfect replacement. Just remember to take accurate measurements of all the components listed above, and you’ll find an exact match easily!
Things You Need to Know Before Measuring Recliner Springs
Before measuring recliner springs, there are a few things to remember. First, measure each spring separately so that you can replace it accordingly.
Secondly, ensure you take accurate measurements as they can impact how comfortable the chair will be; too short or too long won’t give the necessary support and cushioning. To get an accurate measurement, use a tension gauge or an ordinary ruler to measure the length of the spring from one end loop to the other.
Lastly, don’t forget to check for where the springs have been wrapped and count how many times each spring has been wrapped to ensure your replacement is correctly sized. Measuring recliner springs isn’t difficult, but by taking a few moments to consider these tips, you’ll ensure you get the size just right when it comes time for a replacement!
Benefits of Measuring Recliner Springs
Measuring recliner springs is an important step in determining whether or not your furniture will be comfortable and provide adequate support for you when seated. The length, diameter, and type of spring used all impact your overall comfort level of you when seated on the furniture.
Measuring the springs helps ensure that only the right size and type of springs are used to prevent issues such as sagging or uncomfortable seating.
The benefits of measuring recliner springs don’t just end there; measuring them regularly also increases the longevity of your furniture, ensuring that it remains reliable for many years to come.
With regular measurement, any potential issues can be checked quickly and easily so that repairs or replacements can be considered well before damage actually takes place.
6 Common Mistakes People Make When Trying to Measuring Recliner Springs
1. Not Using a Measuring Tape
One of the most common mistakes people make when measuring recliner springs is not using a measuring tape. A measuring tape will ensure that you get an accurate measurement of the spring.
Without a measuring tape, it is easy to miscalculate the size of the spring, which can lead to ordering the wrong size spring for your recliner.
2. Not Measuring the Length of the Spring
Another common mistake people make is not measuring the length of the spring. The length of the spring is important because it determines how much tension it can hold.
If you do not measure the length of the spring, you may order a spring that is too short or too long for your recliner, which can cause problems with the recliner’s mechanism.
3. Not Measuring the Diameter of the Spring
In addition to measuring the length of the spring, you also need to measure the diameter of the spring. This is because the diameter of the spring determines how thick the wire is that makes up the spring.
If you do not measure the diameter of the spring, you may order a spring that is too thin or too thick for your recliner, which can also cause problems with the recliner’s mechanism.
4. Not Measuring the Number of Coils in the Spring
Another important measurement to take is the number of coils in the spring. The number of coils determines how tight or lose the springs will be when they are installed in your recliner.
If you do not measure this correctly, you may end up with too tight or too loose springs, which can cause discomfort when using your recliner.
5. Not Ordering Replacement Springs from a Reputable Company
When ordering replacement springs for your recliner, it is important to order them from a reputable company. Unfortunately, there are many companies that sell fake or counterfeit springs that will not work correctly in your recliner.
These fake springs can cause damage to your recliner and void any warranty that you have on your furniture. Make sure to order your springs from a reputable company to avoid these problems.
6. Not Following Installation Instructions Carefully
Finally, another common mistake people make when trying to measure and install recliner springs is not following installation instructions carefully.
Many people try to save time by skipping steps or not reading instructions carefully, which often leads to installation problems. Make sure to read all instructions carefully before beginning any work on your recliner to avoid any potential problems.
Conclusion
Finding an exact replacement for your recliner springs doesn’t have to be hard if you know how to measure them first accurately! By following these steps, you can easily determine what size and type of springs fit best in your recliner so that it looks good and feels just like new again!
With these measurements in hand, finding exactly what you need should be easy-breezy! So don’t wait any longer—get out those measuring tools today! Thanks for reading our post about how to measure recliner springs.
