Mounting a surge protector under your desk is a practical and space-saving solution to keep your electronic devices organized and protected. It not only reduces clutter on your workspace but also ensures that your valuable electronics are shielded from power surges. If you’ve ever wondered how to securely install a surge protector beneath your desk, you’re in the right place.
In this article, we will explore various methods and step-by-step instructions on how to mount a how to mount surge protector under desk effectively.
Whether you prefer using adhesive-backed Velcro, cable management racks, or other creative solutions, you’ll discover the most suitable technique for your workspace needs. Say goodbye to messy cords and ensure the safety of your electronic equipment while maintaining a clean and organized desk space.
The Importance of Surge Protectors for Electronic Devices
One of the most important aspects of maintaining electronic devices is protecting them from power surges. Power surges occur when there is a sudden increase in electrical current, which can happen due to lightning strikes, faulty wiring, or even turning on large appliances.
These surges can cause serious damage to our beloved electronics and potentially render them completely useless. That is why it is essential to have surge protectors in place to safeguard our devices.
The Role of Surge Protectors
Surge protectors are designed to regulate and stabilize the flow of electricity, protecting electronic devices from sudden spikes or drops in voltage. They work by diverting excess electrical energy into the ground instead of allowing it to reach your devices. This prevents damage to your electronics and ensures their longevity.
10 Methods How to Mount Surge Protector Under Desk
1. Use Adhesive Tapes
One of the most common methods to mount surge protectors under a desk is to use adhesive tapes such as Velcro or double-sided tape. This is a simple and cost-effective way to attach the surge protector to the underside of the desk without having to drill any holes or use screws.
To ensure that the surge protector stays securely in place, it is important to choose an adhesive tape that can hold up against vibrations and other movements.
2. Use Zip Ties
Another method for mounting a surge protector under a desk is to use zip ties. Zip ties are strong plastic straps with teeth on one end that can be used to secure objects in place. To use this method, you will need to attach the zip tie around the surge protector and then thread it through a hole or opening in the desk before tightening it into place.
3. Use Magnets
Magnets can also be used to mount a surge protector under a desk, although this method is not suitable for all desks due to their shape and material type. If your desk has metal components, you may be able to use magnets such as Neodymium magnets or rare earth magnets, which have powerful magnetic fields that can securely hold objects in place even when subjected to vibrations and movement.
4. Use Screws
Screws are another popular option for mounting a surge protector under a desk, as they provide an extremely secure attachment point that won’t come loose over time, like some of the other methods mentioned above. To use this method, you will need access to the underside of your desk so that you can drill holes for the screws and then attach them securely into place using washers and nuts if necessary.
5. Use Hooks
Hooks are another great option for mounting a surge protector underneath your desk, especially if you don’t want to drill any holes into your furniture or damage its surface with adhesive tapes or magnets.
Hooks come in various sizes and shapes so you should be able to find one that fits perfectly onto your furniture without any problems. Once attached, simply hang your surge protector from it using string or wire ties for added security if needed.
6. Hang from Cable Raceway
If your desk has cable raceways installed along its underside, then you may be able to hang your surge protector from these instead of drilling holes into it or using other methods mentioned above such as hooks or adhesive tapes.
Simply feed some string or wire ties through one of the openings in the cable raceway before attaching them securely around your surge protector and hanging it off one side of the raceway for easy access when needed.
7. Mount on Wall Near Desk
If there isn’t enough space underneath your desk for mounting a surge protector, then consider mounting it on an adjacent wall instead of near where your equipment is located so that all cables reach easily without having too much slack between them and their power source (the wall outlet).
This method requires drilling some holes into either drywall or masonry, depending on what type of wall you have available but provides an extremely secure attachment point that won’t move over time like some of the other methods mentioned above do when subjected to vibrations and movement from nearby equipment such as computers/monitors etc.
8. Attach Directly onto Desk Surface
If there isn’t enough room underneath your desk for mounting a surge protector, but there is enough room on top of it (either by itself or with additional furniture), then consider attaching it directly onto its surface with screws/bolts/nuts etc.
This provides an extremely secure attachment point but also requires more effort than some of the other methods mentioned above since you’ll need access underneath/behind/around your furniture in order to fit everything together properly before screwing/bolting/nutting etc.
9. Attach Directly onto Desk Legs
If there isn’t enough room anywhere else, but there is enough space between two legs at each corner of your furniture (or at least two legs close together), then consider attaching them directly onto these with screws/bolts/nuts etc.
Again this provides an extremely secure attachment point but requires more effort than some other methods since you’ll need access underneath/behind/around each leg in order to fit everything together properly before screwing/bolting/nutting etc.
10. Hang from the Ceiling Above the Desk
Finally, if none of these above options work out due to either lack of space or not wanting to damage any surfaces with drills, etc, then consider hanging it from the ceiling above where equipment will be located instead – providing all cables reach easily without having too much slack between them and their power source (the wall outlet).
This method requires drilling some holes into either drywall or masonry, depending on what type of ceiling you have available but provides an extremely secure attachment point that won’t move over time like some other methods mentioned earlier do when subjected to vibrations and movement from nearby equipment such as computers/monitors etc.
Things to Consider When Mount Surge Protector under Desk
Before mounting a surge protector under your desk, it is important to consider the location where you will be placing it. Most desks have a wire management tray or grommet holes that can accommodate the power strip.
It is important to choose a location that is easily accessible and not too far from your devices. Also, make sure the location is not in an area with a lot of moisture or humidity to avoid any potential damage to your devices.
Size and Capacity
The size and capacity of the surge protector play a crucial role in deciding where and how it can be mounted. Make sure to check the dimensions and weight of the power strip before purchasing it.
If you have limited space under your desk, consider getting a smaller surge protector that can easily fit in that space without obstructing any other wires or cables. Additionally, ensure that the surge protector has enough outlets to accommodate all of your devices.
Mounting a surge protector under your desk can help in organizing and managing cables. However, it is important to plan out the cable management before installing the power strip. Consider using cable clips or ties to secure any excess cords and prevent them from getting tangled. This will not only make your setup look neater but also reduce the risk of tripping over loose wires.
In conclusion, mounting your surge protector under a desk is a great way to keep it out of sight and free up some much-needed space in your work area. It also ensures that all of your precious electronics are safe from potential power surges.
With the proper tools and instructions, anyone can easily install their surge protector under a desk and prevent any electric overheating or unnecessary damage to their precious items.
You’ve learned exactly how to mount yours securely and thoroughly. So what are you waiting for? Go ahead and take the necessary steps to protect your electronics from power spikes with this successful guide on how to mount surge protector under desk.