There may come a time when you need to remove the back of a lazyboy recliner. Maybe you’re moving and need to get it out of the way. Or maybe you just want to see what’s inside.
Whatever the reason, this guide will show you how to remove the back of a lazyboy recliner. It’s not difficult, but there are a few things to keep in mind. So read on, and learn how to remove the back of a lazyboy recliner safely.
What Is a Lazyboy Recliner?
A Lazyboy recliner is a type of chair that can be reclined to various degrees, from a sitting position to a fully lying down position. It is usually upholstered in leather or fabric and often has a headrest and leg support. Lazyboy recliners are designed for comfort, and many models come with features like massage and heat.
The chairs can be placed in various settings, including living rooms, bedrooms, and even office spaces. While they are often associated with relaxation, Lazyboy recliners can also provide relief for people with back pain or other health conditions. As a result, they have become one of the most popular types of chairs on the market.
Why Remove the Back of A Lazyboy Recliner?
There are a few reasons why you might want to remove the back of your Lazyboy recliner. First, it can make it easier to clean the chair. Dust and dirt can accumulate in the crevices where the back meets the seat; removing the back will give you better access to those areas.
Second, it can make the chair more comfortable. The back of the recliner is often quite firm, and removing it will give you a softer surface to sit on. Finally, it can make the chair more stylish. A bare-backed recliner has a sleek, modern look that can add a touch of sophistication to your home décor.
Whether you’re looking for easier cleaning, more comfort, or a more stylish look, removing the back of your Lazyboy recliner is a great option.
How to Remove the Back of A Lazyboy Recliner Step-by-Step Guide
1. Remove the Screws on The Bottom of The Recliner
There are screws on the bottom of the recliner that needs to be removed. There are usually between two and four screws, depending on the model of the recliner. They will be either Phillips or slot head screws. Remove the screws and set them aside.
2. Pry Off the Back Panel with A Screwdriver or Pry Bar
Once the screws are removed, the back panel can be pried off with a screwdriver or pry bar. Start at the top of the panel and work your way down. Be careful not to damage the upholstery on the back of the recliner as you remove the panel.
3. Disconnect Any Wiring or Hoses Connected to The Back Panel
There may be wiring or hoses connected to the back panel of the recliner. These will need to be disconnected before the panel can be completely removed. Consult your owner’s manual for specific instructions on disconnecting these items.
4. Lift Off the Back Panel and Set It Aside
Once the panel is disconnected from any wiring or hoses, it can be lifted off the recliner. Be careful not to drop or damage the panel. Set it aside in a safe place until you are ready to reattach it.
5. Repeat Steps 1-4 on The Other Side of The Recliner
Repeat the steps above on the other side of the recliner to remove the back from that side as well. This will complete the process of removing the back from your lazyboy recliner.
6. Reattach The Back Panels When You Are Ready to Use The Recliner Again
When ready to use the recliner again, reverse the steps above to reattach the back panels. Be sure that all screws and connectors are tight before using the recliner. With the back in place, your lazyboy recliner will be as good as new!
That’s it! You’ve now learned how to remove the back of a lazyboy recliner. This process is simple and only takes a few minutes to complete. First, follow the steps above carefully to avoid damaging your recliner.
You Can Check It Out To Keep Glass Chair Mat From Sliding on Carpet
How to Take Apart a Lazyboy Recliner
A Lazyboy recliner is a comfortable piece of furniture that can provide many years of enjoyment. However, at some point, you may need to take it apart for moving or repairs. The process is quite simple and only requires a few basic tools.
First, remove the backrest by unscrewing the two bolts that connect it to the base. Next, remove the seat cushion by unzipping the fabric and pulling out the foam insert. The final step is to remove the footrest by unscrewing the retaining nut.
With the footrest removed, you should now be able to take the chair apart for transport or storage easily.
What Should I Do if I Damage the Back of My Lazyboy Recliner when I Remove It?
Accidents happen, even when we’re being careful. If you damage the back of your Lazyboy recliner when you remove it, don’t panic. There are a few simple steps you can take to fix the problem. First, locate the damaged area and determine how extensive the damage is. If the damage is limited to a small area, you may be able to repair it with a touch-up kit.
However, if the damage is more widespread, you may need to replace the entire back panel. Once you’ve assessed the situation, call a customer service representative for your specific model of Lazyboy recliner. They will be able to provide you with further instructions on how to proceed.
With a little effort, you’ll have your recliner back in working order.
Frequently Asked Question
Is It Difficult to Remove the Back of A Lazyboy Recliner?
It’s not difficult to remove the back of a Lazyboy recliner, but it is a little tricky. First, you’ll need a screwdriver to remove the screws that hold the back in place. Once the screws are removed, you can lift the back off the recliner.
What Tools Do I Need to Remove the Back of A Lazyboy Recliner?
You will need a screwdriver and a socket wrench. The screws that hold the back in place are typically Phillips head screws. The socket wrench can loosen the bolts that hold the back in place.
Conclusion
So, there you have it. It’s not as hard as it seems to remove the back of a lazyboy recliner. You just need to be patient and take your time. Thanks for reading our post about how to remove the back of a lazyboy recliner. Have any other tips or tricks for removing the back? Share them in the comments below!
